Sterling SSK-5 User Manual

Op er ating In struc tionsCon veyor Hop perSSK-5516-3MSSter ling Ma te rial Pro cess ing

2. In stal la tion in struc tions»These in stal la tion in struc tions are in tended for per sons withskills in elec tri cal and me chan i cal

2.1. Trans portFor trans port, only the ap pro pri ate lift ing gear should be used (e.g. fork lift or work -shop crane).»Ob serve the car ry ing ca p

2.2. Set-upThe ar range ment of the hop per load ers may vary de pend ing on the type of de -vice to be con veyed on and the ma te rial used. Fas ten

2.3. Com pressed-air sup ply (only with com pressed-air valves)For op er at ing the con trol valves, a com pressed-air sup ply is nec es sary.Check c

2.4. Elec tri cal con nec tion»The elec tri cal con nec tion may only be car ried out by trained per -son nel.Other per sons are not per mit ted to c

516-3MSSSK-5In stal la tion in struc tions 14

3. Func tional de scrip tionThe con veyor hop per is used for the au to matic con vey ance of freely flow ing plas -tic gran ules. The hop per can on

4. Main te nance»This chap ter is in tended for per sons with skills in elec tri cal andme chan i cal ar eas due to their train ing, ex pe ri en

LDis con nect the equip ment from mains sup ply be fore start ingmain te nance pro ce dures to en sure that it can not be switched on un in ten tion

4.1. Main te nance in ter valsDaily: Check warn ing signs on equip ment for good leg i bil ity and com plete ness.with com pressed-air valve:check

Parts & Ser vice:Tele phone: (800) 423-3183 Edi tion: 07/03516-3MSSSK-52These op er at ing in struc tions are for:*(* Please fill in per son

4.2. Ser vicing the hop per loader&In di vid ual hop pers can also be main tained dur ing op er a tion.How ever, Ster ling rec om mends th

4.2.1. Re place the seal ing ringsNonreturn valveOpen the tog gle-type fas ten ers (A) be tween the hop per lid and thehop per loader.Fold the hop pe

Out let flapRe move the con nect ing plug “flap switch” (A) from the con nec tion hous ing of thehop per.Re move the ten sion ring (B) and the seal i

In stall the up per part of the hop per loader (C) on the lower part of the hop perloader (D).In stall the seal ing ring and the ten sion ring (B) on

4.2.2. Ad just the flap switchRe move the con nect ing plug “flap switch” from the con nec tion hous ing of thehop per.Con nect an ohm me ter to PINS

4.2.3. Cleaning the hop perOpen the tog gle-type fas ten ers (A) be tween the hop per lid and thehop per loader.Fold the hop per lid up wards.Check t

5. Spare parts list»This parts list is only for the use of trained per son nel only.All other per sons are not per mit ted to re pair or to change the

26493 Hop per com plete516-3MSSSK-5Spare parts list 261, 2 3 412 7, 8, 9, 10, 11 6

Pos. Or der no. Des ig na tion Wear Code1 26454 flap D2 85610 seal ing B3 28626 fil ter cloth C4 23091 wire cloth C5 28625 seal ing C6 28839 fl

6. Tech ni cal dataBa sic Ver sionHop per loader ca pac ity approx. 5 l (0.16 cu. ft. )Made of stain less steel Clean ing open ingPneu matic valve

Ster ling Ma te rial Pro cess ing re tains all rights to change the in for ma tion in theseop er at ing in struc tions at any time with out no t

6.1 Di men sion Sheet516-3MSSSK-5Tech ni cal data 2915Ox15O mm; 5.9x5.9"15Ox15O mm; 5.9x5.9"43O mm16.9"43O mm16.9"2O8 mm8.18&q

6.2 Con trol Ca ble Wir ing Sche matic516-3MSSSK-5Tech ni cal data 30SOLCx-1DEMAND RSHOPPER FULLON/OFF(OPTIONAL)Cx-6Cx-5Cx-4Cx-2Cx-3NOTE 1.NOTE 2.1

Elec tri cal man ual»This elec tri cal man ual is in tended to be used only by Ster ling ser vice per son nel and trained per son nel au tho riz

Please note that our address and phone information has changed. Please reference this page for updated contact information. These manuals are obsolet

TA BLE OF CON TENTS1. Safety in struc tions ...51.1. Warn ings and sym bols ...

1. Safety in struc tions»These safety in struc tions ap ply to all per sons within the range of ac tion of the equip ment.Please in form all per sons

1.1. Warn ings and sym bolsThe fol low ing warn ings and sym bols are used in these op er at ing in struc tions:»This sym bol in di cates dan ger to l

1.2. Ex pla na tions and in for ma tionVar i ous terms and des ig na tions are used fre quently in these op er at ing in struc -tions to en sure cla

1.3. For your safety·It is ab so lutely nec es sary that you ob serve the op er at ing in struc tions for the cor -re spond ing con vey ing sys tem.